Silverlight Video Player

Created Issue: mms streaming [10974]

Raminloo — Fri, 20 Nov 2009 02:59:51 GMT

I am unable to use our mms streaming link. Getting this error:
Error: Unhandled Error in Silverlight 2 Application ClientBin/VideoPlayer.xap
Code: 4001
Category: MediaError
Message: AG_E_NETWORK_ERROR

Source File: http://localhost/video/default.html
Line: 53

New Post: Considering migrating from QT to SLVP

timacheson — Tue, 10 Nov 2009 09:43:05 GMT

To echo what Tim says, yes this is definitely possible. You can do this by tweaking the C# code. I think you could even achieve these mods using pure JavaScript, though I do reccomend looking at the project source code in Visual Studio -- it's very clear and simple code.

The scrub bar functionality is already there, provided the video has markers to support seeking. So if your video file or stream contains the right metadata, you could certainly add cursor key events to conrol the scrub bar.

And it's certainly possible to hide the control responsible for the play icon, e.g. on the MediaEnded event of the MediaElement -- either in the C# or just with JavaScript.

Created Issue: Playing MP3 file shows no controls? [10901]

LyalinDotCom — Mon, 09 Nov 2009 05:39:45 GMT

I am trying to play an MP3 using this player. The weird thing is that its not giving me a UI unless i go to full screen, any ideas?

New Post: Considering migrating from QT to SLVP

timheuer — Sat, 07 Nov 2009 18:27:30 GMT

You can definitely alter it to do what you want, but the compiled code as-is doesn't do that for you out of the box. You would have to do some modifications.

-th

On Sat, Nov 7, 2009 at 8:42 AM, wakewatcher <notifications@codeplex.com> wrote:

From: wakewatcher

Thanks for the response Tim.

I'm not sure if its actually frame by frame but in essence yes. If you click on the QT example it will stop and then with FF/Chrome (haven't figured out how to do it in IE yet) you can use the arrow keys and step "frame by frame" backward and forward. With IE you can see the effect by pulling the scrubber back and forth and compare it with the same action on the SLVP.) The reason I want the icon not to reappear is the idea is that one wants to see the detail of the picture when the video is stopped. (Which actually seems like a reasonable behavior for many applications.)

Thanks for your help.

Read the full discussion online.

To add a post to this discussion, reply to this email (slvideoplayer@discussions.codeplex.com)

To start a new discussion for this project, email slvideoplayer@discussions.codeplex.com

You are receiving this email because you subscribed to this discussion on CodePlex. You can unsubscribe or change your settings on codePlex.com.

Please note: Images and attachments will be removed from emails. Any posts to this discussion will also be available online at codeplex.com

New Post: Considering migrating from QT to SLVP

wakewatcher — Sat, 07 Nov 2009 15:42:37 GMT

Thanks for the response Tim.

I'm not sure if its actually frame by frame but in essence yes. If you click on the QT example it will stop and then with FF/Chrome (haven't figured out how to do it in IE yet) you can use the arrow keys and step "frame by frame" backward and forward. With IE you can see the effect by pulling the scrubber back and forth and compare it with the same action on the SLVP.) The reason I want the icon not to reappear is the idea is that one wants to see the detail of the picture when the video is stopped. (Which actually seems like a reasonable behavior for many applications.)

Thanks for your help.

New Post: Considering migrating from QT to SLVP

timheuer — Sat, 07 Nov 2009 07:24:20 GMT

When you say single-step -- do you mean frame-by-frame? As to not showing the play icon when stopped -- you'd have to modify the code on that one as I've not exposed that as an optional parameter. That change would be easy enough though.

-th

On Fri, Nov 6, 2009 at 11:22 PM, wakewatcher <notifications@codeplex.com> wrote:

From: wakewatcher

Is there a way to make the slvideoplayer behave like my QT player? Specifically scrub more smoothly and singlestep (on FF with the arrow keys) Also when stopped I'd like not to have the play icon. Eventually I'd like to build a full featured SL app but in the near term thought I'd try at least a SL player. (http://www.bayviewgrand.org/silverlight/silver.html) -thx-

Read the full discussion online.

To add a post to this discussion, reply to this email (slvideoplayer@discussions.codeplex.com)

To start a new discussion for this project, email slvideoplayer@discussions.codeplex.com

You are receiving this email because you subscribed to this discussion on CodePlex. You can unsubscribe or change your settings on codePlex.com.

Please note: Images and attachments will be removed from emails. Any posts to this discussion will also be available online at codeplex.com

New Post: Considering migrating from QT to SLVP

wakewatcher — Sat, 07 Nov 2009 06:22:12 GMT

Is there a way to make the slvideoplayer behave like my QT player? Specifically scrub more smoothly and singlestep (on FF with the arrow keys) Also when stopped I'd like not to have the play icon. Eventually I'd like to build a full featured SL app but in the near term thought I'd try at least a SL player. (http://www.bayviewgrand.org/silverlight/silver.html) -thx-

New Post: Using SkyDrive to host video files for SL2VideoPlayer

timacheson — Mon, 02 Nov 2009 12:02:38 GMT

SkyDrive makes a very nice hosting platform for video. And of course it's free! Just sign-in and upload your WMV file or playlist.

In case anybody else finds this useful or interesting, I recently wrote a blog post demonstrating how to use SkyDrive to "stream" video files to the SL2VideoPlayer. I created an unofficial API for SkyDrive ("SkyScraper") for exactly this purpose.

SkyDrive serves the video extremely fast! A progressive download from SkyDrive feels as good as streaming. Try it! You'll love it.

I'm going to use this as a handy alternative to Silverlight Streaming (Beta) during the transitional period while this service is phased-out and replaced by something similar on Azure. A number of people have used my strategy to stream MP3 audio to various clients, but it's really perfect for WMV files for SL2VideoPlayer.

SkyDrive may not be intended for this type of use, so this is purely for academic interest.

Enjoy!

New Post: mms: stream not smooth

timacheson — Mon, 02 Nov 2009 10:36:48 GMT

In case this helps, I tried your HTML page and it works perfectly for me, both for direct download and streaming:-

http://dl.getdropbox.com/u/16123/Video/video.htm

This is just the standard SL2VideoPlayer embedded in a fairly normal way. I used firebug to alter the MediaSource.

If a video plays at all, then the player is definitely working correctly. If the video sometimes pauses and then resumes, this is because it is buffering. If your connection is fast enough, and the stream or direct download is delivered fast enough, you will not usually have this problem.

Information about how buffering works in SL2VideoPlayer, and how it can be configured, in case this helps:

The MediaElement control in Silverlight is the media player engine at the heart of Sl2VideoPlayer. MediaElement has a default buffering time of 5 seconds. (Windows Media Player is the same.) This means it will buffer 5 seconds of video before playing. Obviously, therefore, if the player has not yet received more than 25 seconds of video after 20 seconds of playing, it will have to wait while the next part of the video is loaded.

If you want to investigate and perhaps even solve your buffering issue this without doing any C# coding, you could change the buffering time using JavaScript:-

http://msdn.microsoft.com/en-us/library/bb979808(VS.95).aspx

I recently wrote this JavaScript file which exposes the MediaElement, so you could easily set the value of BufferingTime in your web page to see how it affects your problem:-

http://slvideoplayer.codeplex.com/Thread/View.aspx?ThreadId=71836

I'd suggest trying a buffering time of 10 seconds to see the effect this has on your problem.

New Post: mms: stream not smooth

xylifyx — Mon, 02 Nov 2009 07:35:22 GMT

The player page itself is

http://dl.getdropbox.com/u/16123/Video/video.html?mms://....

and expect the mss url directly after the '?' mark.

New Post: mms: stream not smooth

xylifyx — Mon, 02 Nov 2009 07:21:05 GMT

You need firefox with greasemonkey enabled

click this link: http://dl.getdropbox.com/u/16123/Video/drplayer.user.js

and goto

http://www.dr.dk/odp/player.aspx?mt=frontpagetab&st=frontpageTab_0

But I've heard you need a danish IP address, so you are probably blocked. If this is the case could you describe the tests so that I can run them.

/erik

On 01/11/2009, at 22.41, timheuer wrote:

From: timheuer
The player uses progressive download and not streaming, so if it is buffering it is because it doesn't have enough data to render or there is some latency. Can you point me to the script and site and if i have a moment I will take a look?

-th

On Sun, Nov 1, 2009 at 2:17 PM, xylifyx <notifications@codeplex.com> wrote:
From: xylifyx
I have created a greasemonkey script that replaces an embedded mediaplayer with videplayer.xap on dr.dk (danish television limited to ip addresses in denmark).
The reason is that the original site does not work right on a mac. However I have had problems with the player. It stops every 20 seconds for a while and then continues.
VLC plays the exact same stream flawlessly, so it is not a bandwidth issue, I have a really good internet connection.
Have you had any report of problems that is similar. Is there any buffering configuration option I can use to see if it helps?
Read the full discussion online.
To add a post to this discussion, reply to this email (slvideoplayer@discussions.codeplex.com)
To start a new discussion for this project, email slvideoplayer@discussions.codeplex.com
You are receiving this email because you subscribed to this discussion on CodePlex. You can unsubscribe or change your settings on codePlex.com.
Please note: Images and attachments will be removed from emails. Any posts to this discussion will also be available online at codeplex.com

Read the full discussion online.
To add a post to this discussion, reply to this email (slvideoplayer@discussions.codeplex.com)
To start a new discussion for this project, email slvideoplayer@discussions.codeplex.com
You are receiving this email because you subscribed to this discussion on CodePlex. You can unsubscribe on codePlex.com.
Please note: Images and attachments will be removed from emails. Any posts to this discussion will also be available online at codeplex.com

New Post: mms: stream not smooth

timheuer — Sun, 01 Nov 2009 21:41:15 GMT

The player uses progressive download and not streaming, so if it is buffering it is because it doesn't have enough data to render or there is some latency. Can you point me to the script and site and if i have a moment I will take a look?

-th

On Sun, Nov 1, 2009 at 2:17 PM, xylifyx <notifications@codeplex.com> wrote:

From: xylifyx

I have created a greasemonkey script that replaces an embedded mediaplayer with videplayer.xap on dr.dk (danish television limited to ip addresses in denmark).

The reason is that the original site does not work right on a mac. However I have had problems with the player. It stops every 20 seconds for a while and then continues.

VLC plays the exact same stream flawlessly, so it is not a bandwidth issue, I have a really good internet connection.

Have you had any report of problems that is similar. Is there any buffering configuration option I can use to see if it helps?

Read the full discussion online.

To add a post to this discussion, reply to this email (slvideoplayer@discussions.codeplex.com)

To start a new discussion for this project, email slvideoplayer@discussions.codeplex.com

You are receiving this email because you subscribed to this discussion on CodePlex. You can unsubscribe or change your settings on codePlex.com.

Please note: Images and attachments will be removed from emails. Any posts to this discussion will also be available online at codeplex.com

New Post: mms: stream not smooth

xylifyx — Sun, 01 Nov 2009 21:17:15 GMT

I have created a greasemonkey script that replaces an embedded mediaplayer with videplayer.xap on dr.dk (danish television limited to ip addresses in denmark).

The reason is that the original site does not work right on a mac. However I have had problems with the player. It stops every 20 seconds for a while and then continues.

VLC plays the exact same stream flawlessly, so it is not a bandwidth issue, I have a really good internet connection.

Have you had any report of problems that is similar. Is there any buffering configuration option I can use to see if it helps?

Reviewed: 1.05 (Oct 17, 2009)

iafupro — Sat, 17 Oct 2009 10:32:32 GMT

Rated 5 Stars (out of 5) - Have done great job. Good very useful.

New Post: Cross-Domain capable?

timacheson — Wed, 14 Oct 2009 16:00:06 GMT

Is it working now? :)

New Post: Cross-Domain capable?

timacheson — Wed, 14 Oct 2009 14:48:30 GMT

belikemike121 -- I'm certain I can fix your problem.

I copied and pasted your HTML and it works perfectly for me.

Your HTML code will work online. If the code doesn't work for you, I suspect you're trying to view the file locally on your hard drive. Deploy it to a web server and run it there, or run it in Visual Studio, or on your localhost IIS instance, and it should work.

Another common cause of this problem is the IIS instance serving the XAP file not being configured with the correct XAP MIME type, but I have checked your example and the Silverlight app is being served correctly.

I reccomend always including an example URL when you have something that doesn't work. In this case, I think you may have solved the problem just by testing your own example URL. ;)

New Post: Cross-Domain capable?

belikemike121 — Wed, 14 Oct 2009 14:23:38 GMT

That did not seem to work.

New Post: Player does not load in FF when not in visible part of page

timacheson — Wed, 14 Oct 2009 09:42:35 GMT

I'm glad to hear you've solved the problem. I like the Mino player, though SL2VideoPlayer is better IMHO.

I'd love to get to the bottom of what the actual problem was. Can you provide a URL or example where so can see your solution working?

Previously I was simply stating an established fact, that there are known issues in Firefox with plug-ins not running when they are not rendered, e.g if the plug-in is embedded in an element that is not visible due to CSS or in an area of a frame which isn't displayed.

If your solution works, then I suspect there was some other problem, perhaps with your implimentation of the app. I suspect something else about your use of the Mino player may have solved the problem, such as differences in the way you implimented. E.g. Perhaps you used JavaScript rather than HTML to initialise the Mino app.

New Post: Player does not load in FF when not in visible part of page

sensei_cz — Wed, 14 Oct 2009 07:40:47 GMT

Well, sorry guys, I do not agree with you. I switched to another SL videoplayer (Mino Player, http://www.silverlight-blog.it/ontheroad/videoplayer/minoplayer_ver1_2.html) and this one is working fine in all browsers regardless of whether it is rendered in visible or invisible part of a page. It must be something in the implementation of SL2 player that is causing this behavior.

I know it is much easier to blame plugins and browser incompatibility but you can hardly use this excuse when you are building commercial websites that should generate you money.

Commented Issue: Multiple players: UI lock on progressive download [10078]

timacheson — Tue, 13 Oct 2009 16:55:42 GMT

FROM FORUM:
------
hey tim

ive just built you up two pages to compare

http://www.dermhairclinic.com/silverlight.aspx

http://www.dermhairclinic.com/mino.aspx

this mino player is here

http://www.silverlight-blog.it/ontheroad/videoplayer/minoplayer_ver1_2.html
Comments: ** Comment from web user: timacheson **

This is interesting. We often use multiple instances of SL2VideoPlayer on a web page with no problems, but we stream the media from Windows Media Services or IIS. I've even had a hundred players on the same page and they all work perfectly and can even all play at once! It's impressive, especially if you've tried this with Flash where you have performance issues and cross-contamination issues (e.g. muting one player can mute all the others).